|
🟢 Stuart's Article
|
How To Connect WSJT-X To Station Master Pro
Complete these steps to see your FT8 contacts in Station Master in real time.
Step 1
In WSJT-X (or similar apps) go to the REPORTING tab in settings, look for the "Secondary UDP" section and enter IP address 127.0.0.1 and port 2333 , then tick "Enable logged contact ADIF broadcast". Click Ok to save settings.
Step 2
See image below and make sure you have those settings in the Station Master Desktop APP.
Step 3
If you need to know how to set up the WSJT-X rig control (to work with the Station Master desktop app) please watch this video where I cover this topic in detail.
This link will take you straight to the right part of the video.
https://youtu.be/qNjgr-vCyqU?si=01Ev1k8oF0LnlVmM&t=484
Step 1
In WSJT-X (or similar apps) go to the REPORTING tab in settings, look for the "Secondary UDP" section and enter IP address 127.0.0.1 and port 2333 , then tick "Enable logged contact ADIF broadcast". Click Ok to save settings.
Step 2
See image below and make sure you have those settings in the Station Master Desktop APP.
Step 3
If you need to know how to set up the WSJT-X rig control (to work with the Station Master desktop app) please watch this video where I cover this topic in detail.
This link will take you straight to the right part of the video.
https://youtu.be/qNjgr-vCyqU?si=01Ev1k8oF0LnlVmM&t=484
You must be signed in to leave comments.. create your free account using your callsign
Article - Neal Dorling 2E0LMI
Article - Elodie Mirza 2E0MZA
